Spreading Manure

Rob uses the John Deere to fill the Spreader

Rob uses the John Deere to fill the Spreader

Over the weekend, Rob and Maurice were cleaning up the horse pasture, and piling up the manure. After seeing the pile, I rushed off the get my tractor and connect the manure spreader. The manure spreader is a fancy wagon that is capable of carrying about a half truck load of manure from the field to my garden. The machine saves a great deal of manual labor, as in the past I had to shovel the manure into a truck, then shovel it back out. With this spreader, Rob could load the manure with his tractor, and I could use the flinging capacity of the spreader to apply a thick layer of organic fertilizer to the garden without touching a shovel.

On our first use of the machine, Rob loaded it up so that the manure towered nearly a foot over the edges. We all assumed that the tractor could pull the wagon heaping full of manure, and it worked with some rough driving.  In order the steer the tractor I had to use the rear brakes, as the front end tended to lift itself off the ground. Then just as I passed over the small rock wall on the edge of my garden the manure spreader experienced a mechanical malfunction: The hitch separated from the spreader.

Hitch Assembly

Hitch Assembly

The spreader was constructed with a hitch and a handy built on spacer that keeps the hitch from laying on the ground.  The whole hitch assembly was held together by four very rusty bolts which snapped as I tried to pull the wagon over the small rock wall.  Luckily we found four bolts in the barn that fit the assembly.

Hitch with New Bolts

Hitch with New Bolts

After reconnecting the hitch it was time to try out the spreader. At first the machine seemed to be working with all of the gears moving but no flying fertilizer. Soon we found a mechanism which advances a track system in the wagon. The tracks force the load back at 1/2 inch intervals, and when the manure moves back far enough, the rotating spikes in the tail end fling the manure in every direction.

Tire Issues

Tire Issues

We all decided after the first load to fill the spreader only half way, since the tractor had trouble negotiating the hill with such as heavy load. The lighter loads helped smooth out the whole process, and before I knew it I was gaining confidence in this new tool. All was well until I noticed the tires inner tube bulging out the side of the wheel. I knew this could be a show stopper as flat tires don’t tend to turn well, but I kept on driving and kept constant watch. After nearly half of the work was done, I noticed the bulge in the tire missing, and curiously the tire was only about half flat. If the inner tube was punctured, the tire should have lost all of it’s air, but it did not. I decided not to wonder why it was still inflated, and figured I’d just be happy and keep working.

One-Half Acre Covered in Manure

One-Half Acre Covered in Manure

When the whole garden was covered, I took this picture which shows the layer of fertilizer covering the garden. The garden begins along the row of trees on the left, and runs behind the greenhouse out to the edge of the field where the poles are sticking out of the ground.

This entry was posted in 8N Ford Tractor, Fertilizer, John Deere, Tools and tagged , , , , , , , , , , , . Bookmark the permalink.

One Response to Spreading Manure

Leave a Reply

Your email address will not be published. Required fields are marked *